A range of Gas Fires from high efficiency Fires to decorative Gas Fires suitable for most chimneys or flues
We have a wide selection of designs from contemporary to classic styles.
Glass fronted gas fires restrict the escape of heat up the chimney .
As well as cutting heat loss up the chimney all these gas fires are convector fires and return hot air from the back of the firechamber into the room.
The overall result is a gas fire with very high efficiencies up to 87%
We offer the Gallery range of glass-fronted gas fires which are all a standard 16 inch size.
They need to be front fitted to allow for removal for servicing.
The heat output of the manual version is 4.4 kW.
7 inches or more in diameter. Usually found in brick properties built before 1960. Most gas fires will fit a Class 1 flue.
A circular flue or flue liner only 5 inches in diameter. Most gas fires can be fitted in a class 2 flue
Usually found in newer properties. The pre-cast flue is made from blocks that fit in the cavity of an outside wall. There are less fires made for this type of flue.
Usually fitted to an outside wall when no chimney is available. The fire takes air from the room and a fan fitted outside removes the gases
Usually used where there is no chimney this type of flue takes air in from outside, through the fire by convection and then expels the burned gases.