A range of Gas Fires from high efficiency Fires to decorative Gas Fires suitable for most chimneys or flues
We have a wide selection of designs from contemporary to classic styles.
A traditional Radiant convector gas fire , this should be hearth mounted, and most of our tiled fireplaces can be made to suit it.
Electronic ignition as standard
4.4 Kw max heat output
Realistic real flame "fuel bed"
Bronze or Pewter finish
Top control with 4 heat positions.
Robinson Willey Sahara LFE Specifications:
Fuel Type: Gas
Inset or Outset: Outset
Available Colours: Bronze or Pewter
Fuel Bed: Deep Coal Bed
Control Device: Top Manual Control
Max Heat Output: 4.4 Kw
Safety Features: Airwash System and Flame Supervision Device
Chimney type(s): Suitable for all types of chimney
Disabled control handle included
Sahara LFE Overall Dimensions:
Height - 643 mm
Width - 727 mm
Depth - 250 mm
7 inches or more in diameter. Usually found in brick properties built before 1960. Most gas fires will fit a Class 1 flue.
A circular flue or flue liner only 5 inches in diameter. Most gas fires can be fitted in a class 2 flue
Usually found in newer properties. The pre-cast flue is made from blocks that fit in the cavity of an outside wall. There are less fires made for this type of flue.
Usually fitted to an outside wall when no chimney is available. The fire takes air from the room and a fan fitted outside removes the gases
Usually used where there is no chimney this type of flue takes air in from outside, through the fire by convection and then expels the burned gases.